Cansec Via Lock2 Panduan Instalasi - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih Cansec Via Lock2. Cansec Via Lock2 10 halaman.
Halaman CetakVia Hub Wiring
D32 (BLUE)
4 RELAYS
NOTE: If the Via Hub cannot be powered from the access controller, power can be supplied from
an alternate supply (12 VDC, 150 mA) connected to the alternate power input terminals. If an
alternate power supply is used, the GND conductor at reader1 must be connected to GND at the
access controller to provide a common signal ground reference.
D35
C
(WHITE)
ON
D23 (RED)
D20 (GRN)
A
D E
B
D26
D27
D31
D30
Figure 4: Via Hub Wiring
Configuration Manual
ALTERNATE POWER (SEE NOTE)
ON
ON
Via Hub
OR
PREFERRED POWER OPTION (SEE NOTE)
}
FROM ACCESS CONTROLLER
}
}
}
Page
9
July 2017 • Rev. 1.1
of
10