Bolton Furniture AMBA2120 Petunjuk Perakitan - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Perakitan untuk Perabotan Dalam Ruangan Bolton Furniture AMBA2120. Bolton Furniture AMBA2120 3 halaman.
Halaman Cetak
Step 1
Read through these instructions thoroughly before beginning assembly. We have found this to be
of great value when first assembling this product.
Step 2
Remove all parts and hardware from packing material. Wooden pieces should be placed on a non
abrasive surface (like the carton or carpet) to prevent damage to the finish.
Step 3
Lay Top Seat (A) upside down and attach Side Assembly (B) to underside of Seat
using 4 - M6 x 45mm Bolts (D), 4 washers (F) and 4 Lock Wahsers (E).
DO NOT TIGHTEN FIRMLY AT THIS TIME.
F
B
E
F
D
E
D
A
Step 4
Insert Cross Dowels (H) in to edge of Cross Rail ( C). Glue and insert Wooden Dowel (I) into
edge of Cross Rail ( C).
Put Glue (K) into the dowel Hole in Side Assembly (B). Align Dowels in
Cross Rail to Dowel Holes in Side Assembly. Attach 2 Cross Rails ( C)
using 4 - M6 x 70MM Bolts (G). Align the Bolts thru the hole in Side
Assembly (B) into the Cross Dowel in the Cross Rail ( C). TIGHTEN
THESE BOLTS FIRMLY! IT IS GOOD TO SEE GLUE SQUEEZE
OUT - CLEAN UP EXCESS GLUE WITH DAMP CLOTH.
C
4/12/17
2 of 3
Wood Stool