Bolton Tools PBS-9 Panduan Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Bolton Tools PBS-9. Bolton Tools PBS-9 6 halaman. Bar§ion punching shear
Halaman CetakUSAGE
This product can be used to cut the low-carton shaped steel, round-steel,
angle-steel, square-steel, strip-steel and sheet metal. It is especially suitable for
building site machining repairing. And it is suitable for punching holes in plate made
or low-carbon steel, copper, aluminum, plastic etc. With different punches and dies,
you can make holes from dia. 3mm to 22mm or the same holes of special shape on
plate from 0.5mm to 4.5mm thickness. This machine adopts welded steel plate
construction. Light weight allows moving it easily. Operation is easy and simple. So
it is especially suitable for the medium or small workshops and home-use.
Main technical specifications (mm):
Model
Round steel
Square Steel
Flat steel
Angle steel
Plate steel
T-steel
Max. punching capacity
Throat depth
Punch mold & die
Body packing size
Handle packing size
N.W/G.W
Thickness
Material
Aluminium
Copper
A3 carbon steel
NOTE
1. Before using this machine, read this manual carefully at first. Check the
fastening screws of every part and see if they are loose, if loose, please tighten
them.
2. Lubricate the sliding place usually.
3. Before shearing, the work-piece must be fastened in order to avoid harming.
4. Be sure not to put finger under the blade.
5. Keep ones balance, far away from the work-piece, in order to avoid harming.
6. Be care for the handle, in order to avoid harming. The strength of the handle is
0.5-1.5
1.5-2.5
2.5-20
3.0-20
3.0-30
5.0-20
6.0-30
8.0-18
PBS-9
22mm
20mm
90x14mm
60x7mm
10mm
60x7mm
8.0mm
160mm
55x34x18mm
99x40x66cm
124x3.3x7.4cm
99/115kg
2.5-3.5
5.0-20
6.0-20
10-17
3.5-5.0
8.0-20
8.0-20
----