Dormakaba UNIQUIN Petunjuk Pemasangan - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan untuk Perabotan Dalam Ruangan Dormakaba UNIQUIN. Dormakaba UNIQUIN 8 halaman. Door closer system
Juga untuk Dormakaba UNIQUIN: Manual (12 halaman)

Halaman Cetak

dormakaba Mounting instructions

3.4.2 Dimensions

Fig. 6

Dimensions of a mounted door closer system

4 Storage and

transport

CAUTION

Risk of crushing and collision due to

unsecured components.

Unsecured components can lead to crushing

or impact injuries during transport.

• Secure components adequately during

transport.

ATTENTION

Risk of damage during transport.

Unsecured components may be damaged

during transport.

• Secure components adequately during

transport.

5 Mounting

preparation

5.1

Tools for mounting

• A screwdriver Torx T25

• A hexagon socket set

• A torque wrench

UNIQUIN Door Closer System

10-19

WN 059547 45532

5.2 Check mounting conditions

Requirement

• The door frame system is mounted.

Make sure that the installation situation for the

door closer system's mounting is available (Abb.

5).

TIPS AND RECOMMENDATIONS

Screw threads for the door closer cannot be

cut into the door frame's cover profile later.

2. Make sure that the opening angle of the glass

door is correctly limited according to the

installation situation, e.g. by a doorstop.

→ The mounting conditions have been checked.

5.3 Prepare mounting

Remove the brackets from the mounting plate

(Abb. 7 and Abb. 8).

Fig. 7

Unscrew the brackets

Fig. 8

Disassemble the brackets

Storage and transport

2019-08