Dormakaba UNIQUIN Manual - Halaman 2
Jelajahi secara online atau unduh pdf Manual untuk Unit Kontrol Dormakaba UNIQUIN. Dormakaba UNIQUIN 12 halaman. Door closer system
Juga untuk Dormakaba UNIQUIN: Petunjuk Pemasangan (8 halaman)
Halaman Cetakdormakaba System manual
1 About this manual
EN
1.1
Information about the
manual
This manual describes the characteristics of the
UNIQUIN frame system and contains general
information about installation and operation.
The illustrated unit components and configurations
are an example and do not show every possible
product combination. This manual does not replace
the installation manual, it complements the
information with reference to the unit as a whole. See
other applicable documents for further information.
1.2
Other applicable documents:
Refer to the following technical documents for the
product:
1.2.1
Project-related unit drawing
TIPS AND RECOMMENDATIONS
A project-related unit drawing is only
required for units in fixed length or fixed
length with oversize.
No project-related unit drawing will be
created if standard stock lengths are
ordered.
Target group
Qualified personnel (fitters), planners (architects) and
operators
Content and structure:
• Diagram of the arrangement of supplied system
components
• Technical drawings with dimensions
• Diagram of installation scenario on site
Validity:
Describes the installation situation approved by the
customer and therefore the product supplied. The
basis of this is the installation measurements at the
point of order.
Application:
• Basis for the comparison of installation
measurements and conditions at the installation
site with the system components supplied or
planned.
• Basis for the comparison with the installation
situation, e.g. with the building plan.
• If the installation situation on site differs from the
project plans or project-related unit drawing, then
the installation situation will have to be adapted on
site, or the system components will have to be
customized on site by specialist fitters, taking into
2
UNIQUIN System
account tolerances and clearance values of
individual components.
TIPS AND RECOMMENDATIONS
Refer to the tolerance and clearance
specifications for each system component in
the relevant installation manual.
Source:
The document is part of the planning and ordering of
the system. The document can be requested from the
supplier.
1.2.2
Installation manuals for
system components
Target group
Qualified personnel (fitters)
Content and structure:
Hand-on visual representation of the installation
steps
• Safety
• Product description
• Storage and transport
• Installation preparation
• Installation
• Maintenance and care
• Dismantling and disposal
Validity:
Contains relevant information about the system
components supplied, current at time of production.
Application:
Describes using a hands-on approach all essential
information for the safe and correct installation of
the system components, e.g.:
• Comparison of installation measurements and
conditions at the installation site with the system
components supplied or planned.
• Comparison with the installation situation, e.g. with
the building plan.
• Description of the adjustment of system
components by qualified personnel on site taking
tolerances and clearances into consideration.
• Description of requirements and implementation of
installation steps.
Source:
The document constitutes part of the delivery of the
relevant system components.
1.3
Target group
The target group of this system manual for
installation, maintenance and repair is qualified
personnel specially trained in glass fitting. This system
manual is informative for planners and operators.
WN 059609 45532
About this manual
2018-12