Dormakaba UNIQUIN Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Unit Kontrol Dormakaba UNIQUIN. Dormakaba UNIQUIN 12 halaman. Door closer system
Juga untuk Dormakaba UNIQUIN: Petunjuk Pemasangan (8 halaman)

Halaman Cetak

dormakaba System manual

3.8 Door Closer TS 97

A surface-mounted sliding track closer in UNIQUIN-

Design with adapter plate for use on a glass door

with UNIQUIN.

Installation conditions:

• The glass door must be prepared for use with

appropriate pre-drilled holes.

• A suitable horizontal door frame profile must be

ordered for use with a door closer.

Technical information

• Suitable for disabled access according to DIN 18040

for door widths up to 1100 mm

• Standardized length of door closers and sliding

track

• Easy door opening according to DIN SPEC 1104

• Adjustable closing force EN 2-4

• Including opening limiter as standard

3.9 Door closer ITS 96

An integrated sliding track door closer for use in a

wooden door with UNIQUIN.

Installation conditions:

• The glass door must be prepared for use with

appropriate cut-outs.

• A suitable horizontal door frame profile must be

ordered for use with a door closer.

Technical information

• Easy door opening according to DIN SPEC 1104

• EASY OPEN technology

• Adjustable closing force and speed

• For door leaf widths up to 1400 mm

• Adjustable end stop can be disabled

3.10 Drop-down seal

The drop-down seal optimizes the acoustic properties

of the UNIQUIN unit by sealing the opening

underneath the glass door when it is closed.

The drop-down seal minimizes draft underneath the

glass door when it is closed.

Installation conditions:

• The door frame must be prepared for use with a

drop-down seal, see installation manual.

• It can be retrofitted.

UNIQUIN System

4 General installation

4.1

The product has no fixed outside or inside and can be

mounted aligned on both sides.

2. Check the escape direction on site and compare it

3. Check the opening direction of swing doors on site

4. Consider the direction of other components

5. Determine the direction of the unit based on the

6. Mark the unit alignment on the ground, e.g. with a

WN 059609 45532

General installation information

information

TIPS AND RECOMMENDATIONS

See the enclosed installation manuals for

the individual system components for

details of the individual installation steps.

Observe the alignment of the

unit

TIPS AND RECOMMENDATIONS

Since the alignment of the unit is specified

by, for example, the project-related unit

drawing and building-specific requirements

such as escape routes, it is essential to

identify the correct alignment for

installation.

Check assembly location on site, e.g. in the

building floor plan.

with the plans or project-related unit drawing.

and compare them with the plans or project-

related unit drawing.

(optional)

e.g. sliding door or acoustic element, and the

plans or project-related unit drawing.

on-site check, and adjust the installation

according to the plans and project-related unit

drawing.

chalk line.

2018-12