CANTERBURY Z3450 Panduan Petunjuk Instalasi - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Perlengkapan Kamar Mandi CANTERBURY Z3450. CANTERBURY Z3450 10 halaman. Adore sink mixer pivoting tube

Halaman Cetak

Installation Instructions



❹

Install the supplied mounting stud 4, and

verify it is securely installed.



Under the sink, stack the supplied half ring

❻

rubber gasket 6, above the half ring mounting

plate 7, and feed them onto the stud. Then screw

the mounting nut 8, onto the stud. Screw the

mounting stud until the half ring rubber mates

up with the underside of the sink.

Further information Phone (03) 9761 4603

Model : Z3450



Feed the O-ring 5, over the water supply hoses.

❺



Insert the tap into mounting hole. Feed the

water supply hoses carefully through the hole

ensuring that they are not bent or kinked, as this

could result in permanent damage or leakage.

Install the water supply hoses into the tap body -

Note: Hand tighten only, DO NOT over tighten- 2



❼

Check the position of the tap on the sink, then

tighten the nut using a 13mm wrench.

Note: the under deck mounting surface must be flat.

If the mounting surface is irregular, the nut may not

be secured, and the tap will be loose on the sink.

[email protected]