Akytec ITP15 Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Ukur Akytec ITP15. Akytec ITP15 10 halaman. Led bargraph indicator
Halaman Cetak
1 Overview
ITP15 is a universally applicable process indicator. It is designed for visualizing percentage
reading of process parameter and can be used with various standard DC current or voltage
signals. The device requires 24V DC auxiliary voltage.
2 Technical data
Table 2.1 Technical data
Power supply
Power consumption, max.
Input
Input signal
Sampling time
Accuracy
Input resistance
Output
Type
Loading capacity
Display
Display hysteresis
Display events
Enclosure
Dimensions
Weight, max
2.1
Galvanic isolation
The ITP15 has three potential groups:
Power supply 24 V DC
Analog input
Digital output
Galvanic isolation from each group to enclosure
Galvanic isolation between groups
2.2
Environmental conditions
The device is designed for natural convection cooling. It should be taken into account when
choosing the installation site.
The following environment conditions must be observed:
clean, dry and controlled environment, low dust level
closed non-hazardous areas, free of corrosive or flammable gases
Table 2.3 Environmental conditions
Ambient temperature
Storage temperature
IP Code
Protection class
Relative humidity
akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany Tel.: +49 (0) 511 16 59 672-0 ·
Parameter
0-20 mA, 4-20 mA
0-10 V, 2-10 V
Conditions
Value
24 (10...30) V DC
1 W
1
0-20 mA, 4-20 mA, 0-10 V, 2-10 V
0.3 s
± 2% FS
≤ 115 ohm
≥ 250 kohm
1
NPN transistor
200 mA, 42 V DC
LED, 10 segments, 2 colors (red/green)
1%
signal < 0%
signal = 0%
0% < signal < 100%
signal = 100%
signal > 100%
fault
for panel mounting, horizontal or vertical
48 x 26 x 65 mm
approx. 30 g
500 V
500 V
Permissible range
-40...+60 °C
-25...+55 °C
front IP65, rear IP20
III
up to 80% (at +35°C, non-condensing)
www.akytec.de
2