Asus Z97-C Manual - Halaman 22

Jelajahi secara online atau unduh pdf Manual untuk Motherboard Asus Z97-C. Asus Z97-C 48 halaman.

Memory configurations

sockets.

1-8

excess memory from the higher-sized channel is then mapped for single-channel

operation.

CPU spec, DIMM voltage below 1.65 V is recommended to protect

the CPU.

or more memory on the motherboard, the actual usable memory for the OS can be

about 3GB or less. For effective use of memory, we recommend that you do any of the

following:

Use a maximum of 3GB system memory if you are using a 32-bit Windows

Install a 64-bit Windows

motherboard.

For more details, refer to the Microsoft

com/kb/929605/en-us.

(Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB).

(SPD), which is the standard way of accessing information from a memory module.

Under the default state, some memory modules for overclocking may operate at a

lower frequency than the vendor-marked value. To operate at the vendor-marked

or at a higher frequency, refer to section 3.5 Ai Tweaker menu for manual memory

frequency adjustment.

memory load (4 DIMMs) or overclocking condition.

The stability and compatibility of the memory modules depend on the CPU's

capabilities and other installed devices.

we recommend that you install memory modules of the same version or data code

(D/C) from the same vendor. Check with the vendor to get the correct memory

modules.

the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support.

OS when you want to install 4 GB or more on the

support site at http://support.microsoft.

Chapter 1: Product introduction

OS, when you install 4GB

OS.