Battery Power Solutions Freedom V2 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Kamera Battery Power Solutions Freedom V2. Battery Power Solutions Freedom V2 20 halaman. Cpap battery

Battery Charging
Dual Battery Charging
Two batteries may be bridged together for charging; however, they will
not charge simultaneously. As shown in the image below, battery B will
charge first and then battery A will begin charging.
To begin the dual charging process battery A must be charged to at
least 15%. Battery B can be at any charge level including 0%.
Depending on the power supply being used, it is normal for the digital
display screen of the batteries to read separate and different voltages.
This is due to the voltage output of the Bridge Cable used to connect
the two batteries together.
■ Plug the power supply into the DC IN port of battery A.
level of this battery must be
• If a Power Supply Adapter is required, plug it into the DC IN
port of battery A and then into the PAP device power supply.
■ Plug the Bridge Cable into the DC OUT port of battery A then into
the DC IN port of battery B.
■ Plug the power supply into the wall outlet to begin charging.
battery
A
�16%
starting
charge level
t
F'ower
SU)lpiy
Bridge Cable
Example image shown with
ResMed AirSense 10 power supply.
battery
any starting
charge lellel
(l"clodlng �)
15%.
7
The charge
.,_DC OUT
.,_ Bridge Cable