Advance Appliances ECB 210 Instalasi dan Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Instalasi dan Panduan Pengguna untuk Ketel uap Advance Appliances ECB 210. Advance Appliances ECB 210 17 halaman. Electric combination boiler
Halaman CetakOPERATION
When heating is switched on water is pumped from the store to the
radiators and has the benefit of providing immediate heat. A temperature
gauge is fitted for convenience and diagnostics. The store works at an
optimum temperature of 75°C . Set temperature between 70°C and 75°C
on the thermostat dial. Note: this may need some fine tuning to get the
store to 75°C.
In the higher part of the tank is a large efficient hot water coil which draws
heat from the store for hot outlets in the property. It is connected to
the mains so provides fast safe hot water to all outlets without the need
for pumps. On one overnight charge this store will deliver enough hot
water for one bath and one shower.
Your morning shower will not be compromised if the heating is on.
Two programmers are supplied. The time clock on the tank is for
programming the unit to coincide with your off peak tariff electricity.
Please set this to co-incide with these off peak periods. This keeps running
costs down.
The remote wireless programmer is used for timing the on / off
periods of central heating and is left to the user. Please set this to suit your
own comfort and lifestyle.
Instructions are provided for these programmers.
An alarm will sound if the unit overheats. Isolate electric supply
immediately and turn off water service valve. Call your service
agent.
HANDLING
Never lift the unit by holding the pipe work, always lift and position holding
the body of the tank. It is a 2 man lift.
POSITIONING THE ECB
Position the unit on a flat level surface that is capable of bearing 250kg with
controls and immersion heaters fully accessible for any future maintenance.
Leave a space of 200mm above the unit in case of a future requirement for
servicing.The unit can sit directly on the floor.
5