Advance Appliances EGI2-U Instalasi dan Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Instalasi dan Panduan Pengguna untuk Ketel uap Advance Appliances EGI2-U. Advance Appliances EGI2-U 12 halaman. Electric boiler 6, 9 & 12kw

Advance Appliances EGI2-U Instalasi dan Panduan Pengguna
INTRODUCTION
Please read and understand these instructions prior to installation and commissioning.
These instructions should be left with the customer once the unit is commissioned and
running satisfactorily.
The boiler is available in three output versions, 6kW, 9kW and 12kW and can be specified
for standard central heating circuits with an 80 degree flow or underfloor circuits with a
60 degree flow.
The unit is intended for domestic central heating systems and can be connected to single
phase domestic electricity supplies, please see the Technical Specification for more
information.
Advance eGlow boilers are compact and quiet in operation, require no fluing and can be
located anywhere within the property. A pump is fitted in the eGlow making installation
very straight forward. The pump has an over run facility and there is an automatic by pass
fitted. The eGlow should be installed as a sealed system boiler. A sealed system kit is
available for easy installation with an 8 litre expansion vessel. This can be sited anywhere in
the circuit giving the installer flexibility.
The eGlow is controlled externally with a programmer and room thermostat arrangement
with voltage free switching (not supplied). There is a connector in the boiler casing for
this purpose. Standard central heating programmers and room thermostats can be used.
The boiler is fully modulating and soft switched on start up. This enhances the life of the
heat exchangers as well as reducing the loading on domestic electricity. A single LED
highlights running and fault modes.
A flow switch prevents the boiler running in dry conditions and there are two levels of
overheat protection.
The Advance eGlow boiler is guaranteed for two years against faulty manufacture, subject
to terms and conditions, and a technical help desk service is offered during office hours.
The unit requires no maintenance in ordinary operating conditions. Stainless steel heat
exchangers are fitted for long life and reliability.

PRODUCT CODES

CODE
TYPE
EG6
6KW CENTRAL HEATING BOILER
EG6-U
6KW UNDERFLOOR HEATING BOILER
EG9
9KW CENTRAL HEATING BOILER
EG9-U
9KW UNDERFLOOR HEATING BOILER
EG12
9KW CENTRAL HEATING BOILER
EG12-U
9KW UNDERFLOOR HEATING BOILER
SIZE
510h x 400w x 167d
510h x 400w x 167d
510h x 400w x 167d
510h x 400w x 167d
510h x 400w x 167d
510h x 400w x 167d
2
WEIGHT FULL KG
15KG
15KG
15KG
15KG
15KG
15KG