1byone 210NA-0004 Buku Petunjuk - Halaman 2
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Antena 1byone 210NA-0004. 1byone 210NA-0004 2 halaman. Amplified digital indoor/outdoor hdtv antenna new concept series - 85 miles range omni-directional reception
Halaman Cetak1. Connect the Antenna and Power Supply Accessories
A.
Connect the 26ft long coaxial cable to the antenna (as shown in figure 1 below)
1
F-type connector
linking bolt
Coaxial-cable
Water-proof kit
B.
Connect the other end of the 26ft coaxial cable to the power supply box (as
shown in gure 2 below).
2
To ANT/IN or CABLE IN
on back of TV
Power Adapter
To Wall Outlet
26' Coaxial Cable
C.
Connect the coaxial cable from the power supply box to the ANT/IN or CABLE IN
port on the back of your TV (as shown in figure 3). Note: For TV's that require a tuner
box, connect the coaxial cable from the power supply box to the tuner box ANT/IN or
CABLE IN port.
Back of TV
3
ANT/IN
ANT/IN
CABLE IN
From
Power supply box
D.
The antenna's built-in ampli er requires power to operate properly. Plug the
round end of the power adapter's cable cable into the power supply box (as shown in
gure 2). Then insert the power adapter into any standard 110V outlet (see this
option in gure 4).
4
Supplied 100-240V Power
Adapter
2. Mount Antenna
Find a convenient location to mount your antenna. Before mounting, screw the
VHF Reception Pole at the middle of the antenna. This is for enhanced VHF
reception.
(Fig.1) Use the wall mounting accessories to fix the antenna on the wall.
(Fig.2) Use the mounting accessories to x the antenna on the balcony.
(Fig.3) Use the pole mounting accessories to x the antenna on the pole.
(Fig.4) Also appropriate for mobile use.
Note: Test your antenna location after scanning for channels & before nal
mounting. In some instances, you may decide to relocate the antenna for better
reception. See "Antenna Placement Options and Tips".