Daffue MONOLOG Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Unit Kontrol Daffue MONOLOG. Daffue MONOLOG 8 halaman. Single door stand-alone door and alarm controller module
Halaman Cetak1. INTRODUCTION
The MONOLOG Module was designed as a Single Door Access and Alarm Controller to be used as a Stand-Alone Controller.
The High Level of Access Control makes it suitable for use at any location.
The flexibility of the MONOLOG makes it suitable for use in the following applications and a lot more:
- Home Access Control
- Office Access Control
- Etc. ...
1.1 Build-in Features
The MONOLOG was designed to be used at a wide variety of locations and the following features were added with this in mind:
•
9 to 18Volt DC Input Voltage
•
2Line 16Character LCD Module with Backlighting (Optional)
•
Status Indication
•
26Bit Weigand Reader with Keypad Reader Interface
•
Door Contact Monitor with Programmable Reader Buzzer and Alarm Output Contact
•
Contact for Door Control.
•
Real Time Clock with Battery Backup.
•
Keypad Programming Routines for Configuration of All Functions
These features could be build up modularly to cut on product cost and prevent the wastage of unused features.
2. CONNECTING THE MODULE
Daffue Electronic Solutions cc –
MONOLOG Users Manual - Issue 1B
24/08/2009
Page 3/8