Dot Origin VTAP100 Panduan Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Perangkat Keras Jaringan Dot Origin VTAP100. Dot Origin VTAP100 17 halaman. Desktop usb reader
Juga untuk Dot Origin VTAP100: Panduan Instalasi (13 halaman), Panduan Instalasi (16 halaman)

Halaman Cetak

2.1 Default operation on factory settings

Before anyone changes the configuration from its default, you can confirm that the unit is

working.

These steps demonstrate that the hardware can detect and interact with an OriginPass mobile

NFC pass, which is ready to work with the default configuration of your VTAP100.

1. Obtain an OriginPass from Dot Origin by visiting https://originpass.com/VTAP/ and add it

to Google or Apple Wallet. (You will require a username and password - contact

[email protected] to get these.)

2. Connect the VTAP100 to your PC, using a USB cable.

3. Open a text editor, such as Windows Notepad.

4. When you tap the OriginPass on the VTAP100:

Pass contents will be displayed in the open text editor.

The diagnostic LEDs on the VTAP100 PCB will flash together.

Your smartphone may signal with a buzz or beep.

Note: Some Android phones will only interact if their screen is on, although it does not

need to be unlocked. You may need to enable NFC in the settings for the smartphone.

Note: If the pass detected does not match the key and ID on the VTAP, or is moved away

too quickly to be read, the pass contents displayed will be an 8 digit random hex string,

such as '08E22AC1', different on each presentation. OriginPass contents will be a

consistent string of the type '3~ffymeK9f_mziYtA6~53999301628695~Valued'. The

separator '~' or '|' will depend on your keyboard language settings.

Note: If local security settings prevent or limit the use of removable storage devices, or

the connection of additional keyboards, an administrator may need to alter those

permissions.

VTAP100 OEM MODULE

INSTALLATION GUIDE

VTAP MOBILE WALLET READERS

PAGE 3