Dafra DRPB64V Panduan Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Alat Keling Dafra DRPB64V. Dafra DRPB64V 6 halaman.

DRPB64V Operation Manual

After extensive use, the tool may accumulate small metal chips

from rivets within the nose assembly of the tool. This will

compromise the tool's efficiency, therefore, it is recommended that you clean or change the nose

assembly parts periodically.

Use the wrench (in accessories pack) and a spanner provided by user;

Included in accessories kit

Provided by user

2) Remove the nosepiece (#1) on the tool using the wrench included in the kit;

3) Disassemble the front sleeve (#2):

4) Disassemble clamping sleeve (#3):

5) Take out the 3-jaw set (#4) from the clamping sleeve (#3), then remove the assembly pusher (#5),

the pusher spring (#6) and mandrel tube (#20) from the tool. Once removed, inspect all parts for

wear before cleaning and replacing them. Any damaged parts should be replaced at this time.

Wrench hole 1 for compressed spring pedestal (#22);

Wrench hole 2 for clamping sleeve (#3);

Wrench hole 3 for nosepieces (#1);

Wrench hole 4 for front sleeve (#2);