Dot-x DNR V SERIES Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Dot-x DNR V SERIES. Dot-x DNR V SERIES 10 halaman. 25 inch display
Juga untuk Dot-x DNR V SERIES: Panduan Pengguna (12 halaman)
Halaman CetakINSTALLERS MENU ADJUSTMENTS
58 AUTO CAMPORT: Enable Camport sense. When in 1 Camport sense is
enabled and when Camport connector plug is detected the display will change to
the Camport source. Range is 0-1.
59 ACK MASK: Not used.
60 POLL RATE: Select Poll rate for MPI communications. Range is 20-169.
61 TIMING PULSE: Select timing pulse for MPI communications. Range is 186-227.
62 DIS. SETUP M: Disable/Enable displaying Setup Menu . Range 0-1.
63 DIS. AUDIO M: Disable/Enable displaying Audio Menu. Range 0-1.
64 DIS. VIDEO M: Disable/Enable displaying Video Menu. Range 0-1.
65 DIS. VCHIP M: Disable/Enable displaying Parental. M. Range 0-1.
66 CH -TIME: Disable/Enable displaying CH TIME. Range 0-1.
67 EN. SET. COL: Disable/Enable custom colors for Setup Menu. Range 0-1
68 EN. AUD. COL: Disable/Enable custom colors for Audio Menu. Range 0-1.
69 EN. VID. COL: Disable/Enable custom colors for Video Menu. Range 0-1.
70 EN. PTL. COL: Disable/Enable custom colors for Parental Menu. Range 0-1.
71 EN. CH-T COL: Disable/Enable custom colors for CH TIME. Range 0-1.
72 FOR. SETUP M.: Select between (0 to 7) to set foreground color for Setup Menu.
Menu colors: 0-Black, 1- Red, 2- Green, 3- Yellow, 4- Blue, 5- Magenta, 6- Cyan, 7 White
73 FOR. AUDIO M.: Select between (0 to 7) to set foreground color for Audio Menu.
74 FOR. VIDEO M.: Select between (0 to 7) to set foreground color for Video Menu.
75 FOR PTL M.: Select between (0 to 7) to set foreground color for Parental Menu.
76 FOR CH-TIME: Select between (0 to 7) to set foreground color for Ch-Time.
77 BCK. SETUP M.: Select between (0 to 7) to set background color for Setup Menu.
78 BCK. AUDIO M.: Select between (0 to 7) to set background color for Audio Menu.
79 BCK. VIDEO M.: Select between (0 to 7) to set background color for Video Menu.
80 BCK. PTL M.: Select between (0 to 7) to set background color for Parental Menu.
81 BCK. CH-TIME: Select between (0 to 7) to set background color for Ch-Time.
Underlined commands are used most often.
12
INSTALLERS MENU ADJUSTMENTS
03 POWER MANAGE: Range is 0-7. 1-7 is the length of time (in hours) that the
set will continue to operate if unattended. When the set nears turn off time, an on-
screen message appears telling you to press any key to continue normal viewing.
When set to 0, this feature is inactive.
04 VERT POS: Moves On-Screen Displays vertically. The Range is from 0-25. This
adjustment is generally set at 5.
05 HORZ POS: Moves On-Screen Displays horizontally. Range is from 1-15.
Generally set at 9.
06 BAND/AFC: There are eight positions:
0 is Broadcast fixed
2 is HRC afc
1 is CATV afc
3 is ICC afc
07 MIN VOLUME: Allows adjustment of minimum volume level. Range is 0-63.
When this item is set to 0, the sound level can be adjusted down to zero.
08 MAX VOLUME: Allows the adjustment of maximum volume level. Range is 0-
63. When this item is set to 63, the set has full adjustment capability.
09 AC ON: Has two positions; 0 is off, and 1 is on. In ON position, the display set
will turn on and off when AC power is applied.
10 KEY DEFEAT: Prevents the end user from accessing screen menus on the front
panel (Menu, Select, Adjust), only can be accessed by the Menu in the remote
control.
11 STRT CH: Determines the channel that is selected automatically each time the
display is turned on and sets the audio volume level at turn-on. Range is 0-255.
0 is the Aux position and 255 is Off. Use ADJUST to change the channel number.
12 STRT VOL: Determines the volume that is selected automatically each time the
display is turned on and sets the audio volume level at turn-on. Range is 0-255.
0 is the Aux position and 255 is off.
13 HOSPITAL MODE: The default is 0 for Concierge and 1 for Hospital Models.
If it is 1 the Private IR codes are selected. Used with feature level to select IR code
type. Range is 0-2.
14 CHAN LOCK: Defeats tuning operations. Range is 0-1. 0 is Off and 1 is On. In
combination with the START channel, it can lock-on a particular channel
15 GHOST CH: Ghost channel when item #11 is set to zero. Zero is off and 1 is on.
When on, the channel number will stay on screen at all times, unless captions are
present. The number moves slightly to prevent damage to the screen. If captions
are on, ghost channel will not be present.
16 SCAN MODE: Range is 0-3. The sets turn off when channel scan buttons are
being used. In 0 mode, scan off is inoperative. In position 1, the set will turn off
between auxiliary and lowest channel. In position 2, the set will turn off between
auxiliary and FM. In position 3, the set turns off after an FM station
4 is Broadcast afc
6 is HRC fixed
5 is CATV fixed
7 is ICC fixed
9