DOTECH FX3DH Series Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol Suhu DOTECH FX3DH Series. DOTECH FX3DH Series 9 halaman. Digital temp. & humidity controller
Juga untuk DOTECH FX3DH Series: Manual (4 halaman)
Halaman Cetak
Constitution
(Function of Display Lamp and Button)
FX3DH
OUT1
OUT2
%
Trip / Alarm Messages
Code
Menu
Internal Parameter Error
5 Y 5
Humidy Sensor Open
H O P
H S T
Humidy Sensor Short
Humidy Lower Input
H L L
Humidy Higher Input
H H H
Temp. Lower Low Limit
T O P
Temp. Higher High Limit
T S T
Temp. Lower Input
T L L
Temp. Higher Input
T H H
reset
※ Reboot or push PRG button in 2 successive time when alarm output is removed.
Description / Instructions
In Case of change of set value by an unknown case.
In case of Input sensor open wire(Normal operation after sensor connecting)
In case of Input sensor short circuit
Lower sensor input than measuring range
Higher sensor input than measuring range
Lower Low Limit Alarm than Low Limit Alarm Value
Higher High Limit Alarm than High Limit Alarm Value
Lower sensor input than measuring range
Higher sensor input than measuring range
OUT1
Turn on when output #1 is ON (Flickering at standby)
OUT2
Turn on when output #2 is ON (Flickering at standby)
LED
ON at trip, Flickering at alarm
Parameter set up locked
PRG
Use at program setup
SEL
Execute selected menu or Input setup value
Move between menus & Increase setup value
BUTTON
▲
Move between menus & Decrease setup value
▼
If pushing for 10 sec. at the same time ,
PRG + ▼
setup value is initialized
- 3 -
Response at
Reset Type
Detection
Immediate Stop
Automatic Reset
Immediate Stop
Automatic Reset
Immediate Stop
Automatic Reset
Immediate Stop
Automatic Reset
Immediate Stop
Automatic Reset
Immediate Stop
Automatic Reset
Immediate Stop
Automatic Reset
Immediate Stop
Automatic Reset
Immediate Stop
Automatic Reset
R20160613