DAGE-MTI HR120 Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor DAGE-MTI HR120. DAGE-MTI HR120 13 halaman. Monochrome monitor
Halaman CetakRear Panel Operation
Power
The AC input power cord accepts voltages in the range
of 108 to 132VAC, 60Hz. If the monitor is going to be used
with 220VAC, an auto transformer must be used in order to
step down the 220VAC supply to 120VAC.
Warning: To prevent the risk of electric shock, do
not remove the cover or back. Refer all servicing to
qualified personnel.
Video In/Out
These BNC connectors permit "loop-through"
connection of a video signal in installations where it is
desirable to display the video signal on more than one
monitor, or send the signal to other equipment in addition to
the monitor. A standard 1Vpp video signal that is applied to
the
VIDEO IN
VIDEO
IN
IMPEDANCE
75Ω⇔Hi
Figure 2: HR120 Rear Panel
BNC also appears at the
OUT
V-LINEAR V-SIZE FOCUS SUB-BRIGHT
VIDEO OUT
BNC.