Asus MG28UQ Panduan Pengguna - Halaman 25

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Asus MG28UQ. Asus MG28UQ 28 halaman. Mg28u series

Halaman Cetak

Power ON

Power Saving

Power OFF

Note: V= Hub On, X= Hub OFF

3.3

Troubleshooting (FAQ)

Problem

Power LED is not ON

The power LED lights amber and

there is no screen image

Screen image is too light or dark • Adjust the Contrast and Brightness settings via

Screen image bounces or a wave

pattern is present in the image

Screen image has color defects

(white does not look white)

No sound or sound is low

3-10

OSD Charging ON

OSD Charging OFF

(default setting)

OSD Charging ON

OSD Charging OFF

• Press the

ON mode.

• Check if the power cord is properly connected to the

monitor and the power outlet.

• Check Power Indicator function in main menu OSD.

Select "ON" to turn on power LED.

• Check if the monitor and the computer are in the ON

mode.

• Make sure the signal cable is properly connected the

monitor and the computer.

• Inspect the signal cable and make sure none of the

pins are bent.

• Connect the computer with another available monitor

to check if the computer is properly working.

OSD.

• Make sure the signal cable is properly connected to

the monitor and the computer.

• Move electrical devices that may cause electrical

interference.

• Inspect the signal cable and make sure that none of

the pins are bent.

• Perform Reset via OSD.

• Adjust the R/G/B color settings or select the Color

Temperature via OSD.

• Adjust the volume settings of both your monitor and

computer.

• Make sure the computer sound card driver is properly

installed and activated.

USB B Type Cable

Connected PC

Possible Solution

button to check if the monitor is in the

Chapter 3: General Instruction

USB B Type Cable

Non-connected PC