Dotsmann DCF-77 Buku Petunjuk - Halaman 2

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Stasiun Cuaca Dotsmann DCF-77. Dotsmann DCF-77 16 halaman. Wireless 433mhz weather station

Halaman Cetak

•

Indoor humidity reading displayed as RH% with MIN/MAX recordings

•

All MIN/MAX temperature recordings show date and time received

•

All MIN/MAX recordings can be reset

•

Indoor comfort level indicator - happy or sad face icons

•

Can take up to three outdoor transmitters

•

LCD contrast setting

•

Low battery indicator

•

Wall mounting or table standing

THE OUTDOOR TRANSMITTER

•

Remote transmission of outdoor temperature to

Weather Station by 433MHz

•

Shower proof casing

•

Wall mounting case

•

Mounting at a sheltered place. Avoid direct rain and

sunshine

SETTING UP:

First, insert the batteries into the Weather station (see "How to install and

replace batteries in the Weather Station" below). Once the batteries are in

place, all segments of the LCD will light up briefly. Following some test data

display, the indoor temperature and humidity, the time as 0:00 the date as 1.1.

and the weather icons sun and clouds will be displayed. If the indoor

temperature and humidity are not displayed after 30 seconds, remove the

batteries and wait for at least 10 seconds before reinserting them. Once the

indoor data is displayed proceed to step 2.

Within 3 minutes of activating the Weather station, place the batteries into the

transmitter (see "How to install and replace batteries in the Temperature

Transmitter" below).

After a few seconds of inserting the batteries into the transmitter, the Weather

Station will start receiving data from the transmitter. The remote temperature

will then be displayed on the Weather Station. If this does not happen after 15

minutes, the batteries will need to be removed from both units and reset from

step 1.

The Weather Station can take up to 3 remote transmitters. If you have

purchased additional transmitters, follow step 2 for all extra transmitters.

However, ensure that you leave 10 seconds in between the reception of the

last transmitter and the set-up of the following transmitter. The Weather

Station will number the transmitters in the order of set-up, i.e. the first

transmitter will have the temperature displayed with the number 1 against it

and so on.

When all the transmitters are set up, there is a testing period, during which the

display switches quickly between all the received transmitters at random,