DoubleSight DS-10UT Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor DoubleSight DS-10UT. DoubleSight DS-10UT 18 halaman.

Use of product

Hold pressing flickering point until it to finish

flickering and continue to enter next

calibrations. (Enter 4 points)

Calibration setting is completed After entering

4 points.

* Please reboot PC when driver installation is completed.

USB Monitor Restrictions

■

Support spec

This monitor is the USB monitor recognized as the USB device that the DOS screen shown in

●

the PC booting will not be displayed.

SW that uses the 3D acceleration function in HW cannot be used in the USB monitor.

●

Real Player (Do not support the extension mode.)

- Most of 3D game

- Program driven by the basis of Direct X

Supporting moving picture program

●

- Power DVD

- Win DVD (supporting version 5 or higher)

- Windows Media Player (supporting Version 10 or previous version)

- VLC

- Gom Player

On USB 1.0, the USB monitor may not normally operated.

●

The power at USB 1 Port is weak that it may not be operated in some PC that it is

●

recommended to use 2 USB Ports.

PC H/W spec possible for extension

●

- Connect 2 USB monitors: Minimum of 1.2GHz CPU / 512 MB Memory

- Connect 3 USB monitors: Minimum of 1.8GHz CPU / 1 MB Memory

- Connect 6 USB monitors: Minimum of 1.6GHz Dual core CPU / 512 MB Memory

USB MONITOR