Electramax eM-50T Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Bayi Electramax eM-50T. Electramax eM-50T 6 halaman. Wireless colour video and audio baby monitor

Halaman Cetak
Note: The picture will be displayed in black and white only.
You must still ensure that the channel selection on the Baby Unit and Parent Unit
are synchronised.
6.0 SETTING UP THE
PARENT UNIT - MONITOR (Receiver)
6.1 Power Supply
The monitor uses either 4 x
1.5v
AA-Size batteries (use alkaline battery only) or the
household AC current
(using the supplied 6V 600mA adapter).
6.2 Loading the Batteries
(See Fig. 9).
WARNING
Do not use rechargeable batteries and never mix old batteries with new ones.
Remove the batteries if the unit is not used for a prolonged period of time.
1
Open the battery compar tment cover on the rear of the Parent unit.
2
Insert 4 x AA-size batteries (follow the plus (+) and minus (-) signs on the diagram inside
the battery compar tment) and then securely close the battery compar tment cover.
Note: The power indicator LED will flash indicating the batteries need to be replaced,
when the battery power is low.
3
Turn the unit ON using the dial labelled PWR/VOL.
4
Set the same channel as on the Baby unit, by pressing the CH button.
5
Adjust the volume, using the dial labelled PWR/VOL.
5
6.3 Using AC Power Adapter
(See Fig. 10).
Plug one end of the provided power adapter into the bottom of the Parent unit.
1
Plug the other end of the power adapter into the mains supply.
2
Note: Use the larger adapter labelled OUTPUT: 6V 600 mA with the Parent unit.
Turn the unit ON using the dial labelled PWR/VOL.
3
Set the same channel as on the Baby unit, by pressing the CH button.
4
5
Adjust the volume, using the dial labelled PWR/VOL.
6
2
Fig. 9
1
3
4
3
1
7.0 ADDITIONAL FACILITIES
You will be pleased to know that you can also view your baby on your television screen
as well as record your baby on a VCR (via the Parent Unit) so you don't miss those
special moments. If your television has a picture in picture facility, you can constantly
view your baby at the same time as watching your favourite programme.
VIDEO
AUDIO
IN
AV (audio/video) Phono to Scart cable
IN
7.1 Recording on a VCR
(See Fig. 11)
The Parent unit has a AV (audio/video) output jack for connecting to a VCR/TV for
recording/viewing.
Connect the mini plug of the provided AV cable to the AV jack on the rear of the
1
Parent unit.
2
Connect the other end of the AV cable to the Scart connector on the VCR/TV, usually
labelled LINE IN.
7.2 Additional Cameras
This unit has the added facility of catering for two additional cameras. These cameras can
be purchased as separate accessories. Both indoor and outdoor cameras are available
directly from Electramax. Whilst camera 1 is viewing your baby in the nursery, cameras 2
or 3 could be used either as a security device (ie installed outside your front door/side
entrance) or alternatively for monitoring separate rooms. Each location can be viewed by
changing the channel number on the Parent Unit to channels 1, 2 or 3.
4
Fig. 10
2
Fig. 11
From the
Parent Unit
to the
Video In.
7