Doug Fleenor Design NODE1-P Panduan Pemilik - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan Perekaman Doug Fleenor Design NODE1-P. Doug Fleenor Design NODE1-P 10 halaman. Single port node ethernet to dmx interface
Halaman Cetak
Setup and Operation
Connections and Indicators
1) POWER LED: This indicator illuminates when the unit is powered and running. It will blink while
the N
1 is in boot loader mode.
ODE
2) NET LED: This indicator illuminates when the unit has established a link with another network
interface such as an Ethernet switch or computer.
3) DMX LED: When the DMX512 port is configured as an output, the DMX LED illuminates when
the N
1 is receiving network data on its configured universe. When the DMX512 port is
ODE
configured as an input, the DMX LED illuminates when a DMX512 signal is applied.
4) DMX512 Port: This connector is used to send or receive DMX512 signals (depending on the
configuration).
5) RJ45: This connector is for PoE power and network data.
4 of 10