Doug Fleenor Design PRESET 10 PORTABLE Panduan Pemilik - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan Perekaman Doug Fleenor Design PRESET 10 PORTABLE. Doug Fleenor Design PRESET 10 PORTABLE 6 halaman.
Juga untuk Doug Fleenor Design PRESET 10 PORTABLE: Panduan Pemilik (11 halaman)
Halaman Cetak
PLAYBACK OF PRESETS
Presets can be played back in one of two ways, a crossfade to a static preset or an autofollow of all ten presets. A crossfade
is a change from the current preset to the newly selected one. The tim e taken to fade from the current preset to the new preset
is taken from the newly selected preset. Once the fade has com pleted it will rem ain at that current preset (static) until another
preset is selected. W hen the autofollow m ethod of playback is used once the fade tim e of the currently fading preset is
com pleted the next preset is autom atically selected.
To begin a crossfade between presets, m om entarily press the preset select button of the preset you wish to play.
To begin autofollow of all ten presets, press and hold the preset select button of preset num ber 1 (approxim ately 5
seconds) until all the LEDs flash once. Once the fade tim e of a preset is com plete, the next preset will be selected
autom atically. W hen preset num ber 10(OFF) has been reached the next preset to be selected will be preset num ber 1.
To exit autofollow m om entarily press any preset select button.
Note:
!
If a static preset is playing at the tim e power is lost Preset 10 will return to that preset when power is
restored. The fade will begin with all 512 channels at 0% and fade up in the tim e recorded to that preset.
!
If the Preset 10 was in autofollow playback at the tim e power was lost, the Preset 10 will resum e
autofollow playback beginning with preset num ber 1.
!
To bypass unused presets In autofollow enter the tim e as 999 seconds. This m eans the longest
autofollow fade tim e is 998 seconds.
LIMITED MANUFACTURER'S WARRANTY
Products m anufactured by Doug Fleenor Design (DFD) carry a five-year parts and labor warranty against m anufacturing
defects. It is the custom er's responsibility to return the product to DFD at the custom er's expense. If covered under warranty,
DFD will repair the unit and pay for return ground shipping. If a trip is necessary to the custom er's site to solve a problem , the
expenses of the trip m ust be paid by the custom er.
This warranty covers m anufacturing defects. It does not cover dam age due to abuse, m isuse, negligence, accident, alteration,
or repair by other than by Doug Fleenor Design.
Most non-warranty repairs are m ade for a fixed $50.00 fee, plus shipping.
Page 6 of 6