Electrex Rexcon Die Sentry Manual

Jelajahi secara online atau unduh pdf Manual untuk Perangkat Perlindungan Electrex Rexcon Die Sentry. Electrex Rexcon Die Sentry 14 halaman.

Die Sentry Manual

Table Of Contents

Introduction

Mounting a Device

Wiring a Device

Using the Die Sentry

Appendix A - I/O Modules

Appendix B - Die Sentry Errors

Appendix C - Troubleshooting Die Protection

INTRODUCTION

The Rexcon Die Sentry combines powerful die protection

capabilities with simple programming and operation and puts it all in

one small package. Five probes are provided which can be

independently programmed into any one of four modes of

operation. This manual contains instructions on installation and

operation of the Die Sentry.

MOUNTING A DEVICE

There are a few general things to be considered when mounting

any of the machine monitoring devices in the Rexcon family. The

suggestions that follow should always be considered when a new

installation is made.

DIRT

All Rexcon devices are housed in NEMA Type 12 Oil-tight

enclosures. The micro-electronics in the Rexcon devices, while

powerful, are not very tolerant of a dirty environment. It is important