dough Xpress D-TXE-2-18 Panduan Pemilik - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan Makanan Komersial dough Xpress D-TXE-2-18. dough Xpress D-TXE-2-18 20 halaman. Commercial grade dough press

Halaman Cetak

PRESSING DOUGH

Your dough press is designed for easy use and operation to reliably press dough

balls. Thickness, shape, and size are directly related to your dough ball, its shape,

the temperature of the dough, the recipe of your dough, type of lubricating food oil,

as well as the settings of your machine. You should experiment with the following

for the results you want.

Depress the on/off button to "on". Button should illuminate when power comes

on.

Set the desired temperature on the time/temperature control panel as instructed

in this manual. Both flour and corn tortillas generally start at 325°F then raise

or lower the temperature until the desired results are achieved. Pizza dough

settings typically run 110°-130°F for room temperature dough and 140°-150°F

when using refrigerated dough. A temperature indicating alarm will sound once

the set temperature has been reached.

WARNING: Never attempt to press frozen dough. Personal injury and damage

to your machine could result!

NOTE: This symbol represents "Hot Surfaces"

With the press in the open position, adjust the press to the desired thickness

by turning the thickness control knob located on the top of the machine. For

manual and electromechanical presses, thickness is reduced by turning knob

clockwise and increased by turning it counterclockwise. For air driven

presses, the opposite is true, thickness is reduced by turning knob clockwise

and increased by turning it counterclockwise as indicated below.

MANUAL &

ELECTROMECHANICAL PRESSES

Thickness setting should be set so that the heat head will lock down firmly with

your product in place.

NOTE: Adjustments may be required from one product to another and will

vary to achieve the desired result.

CAUTION:

Excessive pressure can cause structural damage, voiding

the machine warranty!

WARNING: Make all adjustments while press is open. Adjusting the thickness

while under pressure will result in damage to the press.

PRESSING DOUGH

THICKER

THINNER

AIR PRESSES