dough Xpress D-TXM-2-18-W Panduan Pemilik - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan Makanan Komersial dough Xpress D-TXM-2-18-W. dough Xpress D-TXM-2-18-W 20 halaman. Commercial grade dough press
Halaman Cetak
LEVELING INSTRUCTIONS
Tools Required:
• 5/16" Hex Wrench
• 3/8" Socket Drive Ratchet
• 5/8" Socket, Flat Blade Screwdriver
1.
Remove the existing four hole plugs using a flat blade screw driver. Be careful
not to scratch the surface of the platen mount during plug removal. The caps
will be reinstalled after the leveling adjustment is complete.
2.
Lower the Top Platen until one side touches to determine which side will be
adjusted. In the picture below, the front of the platen could be raised or the
back could be lowered.
16