Baumer OADM 20I6593 Panduan Pengguna - Halaman 47
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Baumer OADM 20I6593. Baumer OADM 20I6593 48 halaman. Laser distance sensor
Halaman Cetak
13 Troubleshooting
Error
The sensor does not
measure
The sensor has
incorrect measuring
values
The sensor does not
reach the accuracy
Manual_OADM20x659_DE_EN.doc
04.12.12
Possible reason
The sync. input or the teach-in
wire is connected to +Vs
The receiving beam is covered by
an object / edge / step
No receiving signal (transparent or
highly reflective object)
Mutual optical interferences
between two or more sensors
Strong ambient light.
Semi transparent, transparent or
highly reflective objects
Rough surface
Color edges
Resolution of the A/D converter in
the control unit
Correction
Connect sync. input or the teach-in wire to 0 V
Make sure that no object is in the receiving
field
Make sure that the laser spot falls on a diffuse
reflecting surface
Make sure that no other light spot is within the
receiving field of the sensor
Prevent ambient light with a shield
Make sure that the laser spot falls on a diffuse
reflecting surface
Possibly use a sensor with laser line
Mount the sensor the correct way
Read the manual of the control unit
47/48
Baumer
Frauenfeld, Switzerland