Dahua F Series Panduan Memulai Cepat - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Kamera Keamanan Dahua F Series. Dahua F Series 18 halaman. Hd ir bullet network camera
Juga untuk Dahua F Series: Panduan Memulai Cepat (17 halaman), Panduan Memulai Cepat (18 halaman), Panduan Memulai Cepat (17 halaman), Panduan Memulai Cepat (15 halaman), Panduan Memulai Cepat (6 halaman), Panduan Memulai Cepat (16 halaman), Panduan Memulai Cepat (18 halaman), Panduan Memulai Cepat (7 halaman), Panduan Memulai Cepat (17 halaman), Panduan Memulai Cepat (16 halaman), Panduan Memulai Cepat (18 halaman), Panduan Memulai Cepat (12 halaman), Panduan Memulai Cepat (16 halaman), Panduan Memulai Cepat (12 halaman), Panduan Memulai Cepat (13 halaman), Panduan Memulai Cepat (15 halaman)

Dahua HD Pinhole Network Camera Quick Start Guide

The following figure shows the structure of device.

The following table shows more details about each component.

No.

Name

Lens

Back cover

Binding wire

Bracket

Bracket adjusting screw

Front cover

Network port

Power input port

1.2 Bidirectional Talk

Note

This function is only supported by HD modular pinhole network camera.



The on-site listening operation is null during the bidirectional talk process.

To set up the bidirectional talk function, do the following:

1. Connect the MIC to the audio input port of the device and PC respectively. Then connect the

earphone to the audio output port of the device and PC respectively.

2. Login the Web and then click the Talk button to enable the bidirectional talk function, the

button becomes orange. Click Talk button again to close the bidirectional talk function.

3. Speak via the MIC at the device end or PC end, and you can receive the audio via the

earphone at the device end or PC end.

Figure 1-8 Structure of device

Table 1-3 Description of components

Function

Receive the optical signal from the environment.

It is used to fix the cable.

It is used to fix the camera.

It is used to adjust the camera angle.

Connect to standard Ethernet cable.

Power port, input DC 12V。