Electric Eel Z5-AF Panduan Operator - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Operator untuk Pembersih Perhiasan Ultrasonik Electric Eel Z5-AF. Electric Eel Z5-AF 9 halaman. Drain cleaning machine
Juga untuk Electric Eel Z5-AF: Panduan Keselamatan dan Pengoperasian Pelanggan (2 halaman)

Halaman Cetak

1. Obtain an inch/lbs. torque

wrench and E-20 from Electric

Eel.

2. Fit the adapter to the nose

cone of the Model Z5-AF

machine as per included

instructions with the adapter.

3. Check the setting of the

clutch with the torque

wrench.

 If adjustment is needed, proceed

as follows:

1. Remove feeder as described

in cage/drum removal.

2. Remove 4 cage/drum bolts

from aluminum backing plate.

This will allow cage/drum

removal and expose clutch

mechanism.

3. Move clutch adjustment bolt

1/8

of a turn tighter or

looser as needed and recheck

setting after reassembly of

cage/drum. Repeat the

procedure as needed to

obtain 35 inch/lbs. maximum.

4. Reassemble and check all 4

bolts for tightness.

5. Reinstall feeder on mount.

OPERATING

INSTRUCTIONS

DANGER

OPERATOR MUST BE

THOROUGHLY FAMILIAR

WITH ALL SAFETY

INSTRUCTIONS BEFORE

OPERATING EQUIPMENT.

FOR AUTOMATIC CABLE

FEEDER

1. Attach a small spear-type

cleaning tool to the end of the

cable. This tool will enable you

to bore a starter hole in the

obstruction, allowing backed-up

water to drain.

2. Place machine cable guide at

pipe opening. NEVER have

exposed cable.

3. Position foot actuator for easy

operator accessibility.

4. Make sure switch is in the

FORWARD position. Run

machine in FORWARD at all

times during cleaning operation.

5. Place one HEAVY leather gloved

hand on the cable guide to

control cable as it rotates inside;

and use the other hand to work

the Feeder Control Lever.

DANGER: Operator must keep

one HEAVY leather gloved hand

on cable guide at all times

during operation.

6. In order to feed cable, the

operator must move the feeder

control lever from NEUTRAL

(the position midway between

FORWARD and REVERSE) to the

FORWARD position, while

depressing the foot actuator.