Baumer BMMV 58 Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Konverter Media Baumer BMMV 58. Baumer BMMV 58 24 halaman. Absolute encoders with profinet interface with bus cover

Halaman Cetak

5. Projecting

All examples in the present manual refer to SIEMENS

controls and the corresponding projecting tool Step7

, since these are common PROFINET controls. With other controls please proceed in a corresponding way.

5.1. Importing the GSDML file

First the attached GSDML file must be imported to enable implementation of the encoder in the projecting

software. The file format is xml ("Extended Markup Language"). With reference to the Profibus GSD files,

GSDML is the common term.

The import operation is performed by Step7

software in the hardware window (HW Config, „Options – Install

GSD File..."). As a prior step the actual hardware project must be closed („Station - close") to enable

successful import. Any alteration of basic settings are configured as described below. The GSDML file itself is

not modified.

In the following dialogue please select the directory including the GSDML file. Mark the file on screen. „Close"

will finalize the operation. The same directory also includes the corresponding Bitmap file providing a small

encoder image in the projecting tool. This file is automatically installed as well.

Manual_PROFINET_EN.doc

9/24

www.baumer.com

17.10.11