Baumer GXAMS Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Konverter Media Baumer GXAMS. Baumer GXAMS 26 halaman. Absolute encoder with powerlink interface
Juga untuk Baumer GXAMS: Manual (41 halaman), Manual (19 halaman), Manual (24 halaman), Manual (19 halaman)

Baumer GXAMS Manual
Disclaimer of liability
The present manual was compiled with utmost care, errors and omissions reserved. For this reason
Baumer IVO GmbH & Co. KG rejects any liability for the information compiled in the present manual.
Baumer IVO nor the author will accept any liability for direct or indirect damages resulting from the use of the
present information.
At any time we should be pleased receiving your comments and proposals for further improvement of the
present document.
Created by:
Baumer IVO GmbH & Co. KG
Villingen-Schwenningen, Germany
Registered trademarks
®
®
®
®
SIEMENS
, SIMATIC
, Step7
und S7
are registered trademarks of Siemens AG. PROFIBUS, the
PROFIBUS Logo and PROFIdrive are registered trademarks of the PROFIBUS user organization respectively
of PROFIBUS International (PI).These and other names applied in the present manual that at the same time
are registered trademarks are not correspondingly marked. Having omitted the respective marking does not
necessarily imply that the names are not registered trademarks or that there are no existing patents and
protected patented designs.

1. Introduction

1.1. Scope of delivery

Please check the delivery upon completeness prior to commissioning.
Depending on encoder configuration and part number delivery is including:
 Basic encoder
 Profibus bus cover
 Sealing bolt for any unused cable gland
 Describing file and manual (available as download on our website)
Baumer_ProfibusDPV0_BIDE_MA_EN.docx
3/26
Baumer IVO GmbH & Co. KG
11.19
Villingen-Schwenningen, Germany