Asus RT-N12B1 Manual - Halaman 3
Jelajahi secara online atau unduh pdf Manual untuk Router Jaringan Asus RT-N12B1. Asus RT-N12B1 5 halaman.
Halaman Cetak
Alternate Installation Procedure
If the above procedure does not work, try this:
1.
Connect only an ethernet cables from the RT-N12 to your PC network adapter, and disable wireless.
2.
Ensure DHCP is enabled in the ASUS firmware for automatic IP/DNS
♦
Open a browser, it will instruct to plug in the WAN (internet) cable. If not, reboot the router
and/or PC.
3.
Put the router into Recovery Mode.
4.
Open the router GUI at 192.168.1.1. The page will open to CFE HTTP recovery console.
5.
Click on the link below Reboot to reset the NVRAM.
6.
Click the Browse button to browse to your DD-WRT firmware file location.
7.
Click the Upload button.
♦
The router will upload and open a screen that says "Allow router time to reboot." WAIT
another 5 minutes. You will see the LAN1 light turn off and notice the "Network Cable
Unplugged" windows popup message in task bar. Wait for the light to turn back on and the
PC to reconnect to router.
8.
Click "Continue" on that page to reboot again, then the DD-WRT admin login screen should open.
♦
If the login screen is white and looks very basic, reboot the router again by removing the
power cable.
RT-N12D1 Installation (updated March 21 2018)
The D1 revision has the same specs as B1 and C1, and can run DD-WRT firmware (reports as Asus
RT-N12B1).
However, installation requires some special steps. These instructions are based on [2]
The tools you are going to need are listed below:
•
The Asus ?Firmware Restoration? program
•
Asus Firmware: Version 3.0.0.4.374.813
•
dd-wrt.v24-14896_NEWD-2_K2.6_mini_RT-N12.trx
•
dd-wrt.v24-18774_NEWD-2_K2.6_mini.bin
•
dd-wrt.v24-33215_NEWD-2_K3.x_mega.bin
•
Newer DD-WRT builds can be found here: Where do I download firmware?
The first 4 can be found in a ZIP file at www.craigonsite.com/s/Asus_RT-N12D1_DD-WRT.zip
Once you have the files downloaded you should be ready to go through these instructions for loading
DD-WRT on the Asus RT-N12 D1. It seems stupid to do it the way listed below BUT it?s the only way the
firmware can successfully and consistently loaded.
These steps below are for installing DD-WRT on a brand new Asus Rt-N12 D1 with the stock Asus firmware
already on there. (If you have bricked your router refer to the Unbricking Your Asus Rt-N12 D1 section in the
reference
1.
Setup your computer?s NIC to a static address. I suggest using 192.168.1.2
2.
Plug your computer into the LAN port marked as ?1? on the back of the router. It is VERY important
you do NOT plug your computer into LAN Port 4. Make sure it?s in LAN port ?1? on the back of the
Alternate Installation Procedure
Asus_RT-N12
3