Asus TV Box Panduan Pengguna - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Router Jaringan Asus TV Box. Asus TV Box 23 halaman.

Troubleshooting

Check this list before calling for technical support or service.

Trouble

Live* reports no SAA7111A EVIP

detected on your card.

Live* reports "Cannot auto-set

video source" or "Can't play live

video..." when starting the ASUS

Live utility software.

Intermittent or no remote control

function

Blank screen

ASUS TV Box

Possible Causes/Solutions

• Your graphics card has no

• Your monitor has the wrong DDC circuit implemented.

Contact your monitor dealer for a solution.

• Your monitor may be set to a display mode not

supported by the software or you may have other video

players, such as the VCD PowerPlayer, opened. Change

to other display modes or close the other video players.

Run the software again and then set up the video source

(see Show/Hide Video Source Option for details).

• Maybe something is between the remote control and

remote control sensor or receiver.

• Maybe the remote control is not aimed directly at the

remote control sensor or receiver.

• Maybe the batteries in the remote control are weak or

dead or installed incorrectly. Try replacing batteries.

• Remove batteries and hold down one or more buttons

for several seconds. Reinstall the batteries and operate

the remote control again.

• Try another channel.

• Maybe you have Screen Saver turned on or your Power

Management Properties of your display are set to turn off

the monitor. Disable your Screen Saver or Power

Management Properties settings.

Reference

option.

VIDEO-IN