Baumer PMG10 Series Petunjuk Pemasangan dan Pengoperasian - Halaman 12
Jelajahi secara online atau unduh pdf Petunjuk Pemasangan dan Pengoperasian untuk Konverter Media Baumer PMG10 Series. Baumer PMG10 Series 32 halaman. Absolute encoders with profinet interface
Juga untuk Baumer PMG10 Series: Manual (41 halaman)
Halaman Cetak
MOUNTING / HOUSING FOOT B3
4.2
Housing foot B3
4.2.1
Mounting the spring disk coupling to the device
We recommend using the Baumer Hübner spring disk coupling K 35, see
page
11, available as accessory� When other couplings are used pay attention to
manufacturer's notes�
7
M
= 1 Nm
t
4.2.2
Mounting to the drive shaft
)
Service life restrictions and angle error by runouts
High runout of the drive shaft can cause device angle error�
High runout of the drive shaft can cause vibrations, which can shorten the ser-
vice life of the device�
» Lubricate drive shaft!
» Minimize drive shaft runout (≤0.2 mm; ≤0.03 mm recommended).
i
The device must be mounted with cable connection facing downward and not
exposed to water�
9/27
2�5 mm
MB253EN - 11173971, 19A2, Baumer_PMG10-DeviceNet_II_EN
section 4.3,