Baumer PMG10 Series Petunjuk Pemasangan dan Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan dan Pengoperasian untuk Konverter Media Baumer PMG10 Series. Baumer PMG10 Series 32 halaman. Absolute encoders with profinet interface
Juga untuk Baumer PMG10 Series: Manual (41 halaman)

Baumer PMG10 Series Petunjuk Pemasangan dan Pengoperasian
2.2
Attention instructions for mounting and operation
)
Risk of destruction due to electrostatic charge
Electronic parts contained in the device are sensitive to high voltages�
» Do not touch plug contacts or electronic components�
» Protect output terminals against external voltages�
» Do not exceed maximum voltage supply�
)
Risk of destruction due to mechanical overload
Rigid mounting may give rise to constraining forces�
» Never restrict the freedom of movement of the device� The mounting instructions
must be followed�
» It is essential that the specified clearances and/or angles are observed.
)
Risk of destruction due to mechanical shock
Violent shocks, e� g� due to hammer impacts, can lead to the destruction of the
sensing system�
» Never use force� Mounting is simple when correct procedure is followed�
» Use suitable puller for dismounting�
)
Risk of destruction due to contamination
Dirt penetrating inside the device can cause short circuits and damage the sensing
system�
» Absolute cleanliness must be maintained when carrying out any work on the
device�
» Never allow lubricants to penetrate the device�
)
Risk of destruction due to adhesive fluids
Adhesive fluids can damage the sensing system and the ball bearings. Dismounting
a device, secured to a shaft by adhesive may lead to the destruction of the device�
» Do not use adhesive fluids for fixing.
MB253EN - 11173971, 19A2, Baumer_PMG10-DeviceNet_II_EN
SAFETy AND ATTENTION INSTRUCTIONS
4/27