Baumer PMG10P Panduan Pengoperasian - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Konverter Media Baumer PMG10P. Baumer PMG10P 40 halaman. Absolute encoder
Juga untuk Baumer PMG10P: Petunjuk Pemasangan dan Pengoperasian (32 halaman), Petunjuk Pemasangan dan Pengoperasian (36 halaman), Petunjuk Pemasangan dan Pengoperasian (32 halaman), Panduan Pengoperasian (44 halaman), Panduan Pengoperasian (44 halaman), Panduan Pengoperasian (40 halaman), Panduan Pengoperasian (40 halaman), Panduan Pengoperasian (36 halaman)

Baumer Hübner

Electrical installation

DANGER

Injury by to secondary damage

Encoder failure or incorrect signals may entail system control errors.

a) Eliminate secondary encoder damage by the relevant safety precautions in the downstream

electronics.

NOTICE

Sensor damage due to faulty power supply.

The sensor can be damaged due to faulty power supply.

a) Operate the sensor only with protected low voltage and safe electrical isolation of protection

class III.

NOTICE

Sensor damage or unintended operation due to work on live parts.

Work on live parts may lead to unintentional operation.

a) Disconnect the power before carrying out any cable.

b) Disconnect the power before connecting or disconnecting electrical connections.

NOTICE

Sensor damage by excessive switching voltage.

The sensor's overload limit is for protection only and not intended as limit for the permanently

switching voltage.

a) Make sure that the maximum permitted switching voltage is not exceeded.

V1 | PMG10 & PMG10P EtherNet/IP

Operating Manual

Electrical installation