Baumer GIM500R Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Sensor Keamanan Baumer GIM500R. Baumer GIM500R 29 halaman. Inclination sensors
Juga untuk Baumer GIM500R: Manual (20 halaman), Manual (13 halaman), Petunjuk Perakitan (2 halaman)

Halaman Cetak

CAN-bus and CANopen communication

CAN bus (CAN: Controller Area Network) was developed by Bosch and Intel for high-speed, economic data

transmission in automotive applications. Today CAN bus has been commercialized for use in industrial

automation.

CAN bus is a fieldbus system (standards administered by CAN in Automation, CiA) for communication

between appliances, actors and sensors of different brands.

CAN-bus characteristics

3.1

• Data rate of 1 MBaud with network expansion up to 40 m

• Network connected on both sides

• The bus medium is a twisted-pair cable

• Real time capability: Defined maximum waiting time for high-priority messages.

• Theoretically 127 users at one bus, but physically only 32 are possible (due to the driver).

• Ensures data consistency across the network. Damaged messages are notified as faulty for all network

nodes.

• Message-oriented communication

The message is identified by a message identifier. All network nodes use the identifier to test whether the

message is of relevance for them.

• Broadcasting, multicasting

All network nodes receive each message simultaneously. Synchronization is therefore possible.

• Multimaster capability

Each user in the field bus is able to independently transmit and receive data without being dependent upon

the priority of the master. Each user is able to start its message when the bus is not occupied. When

messages are sent simultaneously, the user with the highest priority prevails.

• Prioritization of messages

The identifier defines the priority of the message. This ensures that important messages are transmitted

quickly via the bus.

• Residual error probability

Safety procedures in the network reduce the probability of an undiscovered faulty data transmission to

-11

below 10

. In practical terms, it is possible to ensure a 100% reliable transmission.

• Function monitoring

Localization of faulty or failed stations. The CAN protocol encompasses a network node monitoring

function. The function of network nodes which are faulty is restricted, or they are completely uncoupled

from the network.

• Data transmission with short error recovery time

By using several error detection mechanisms, falsified messages are detected to a high degree of

probability. If an error is detected, the message transmission is automatically repeated.

In the CAN Bus, several network users are connected by means of a bus cable. Each network user is able to

transmit and receive messages. The data between network users is serially transmitted.

Examples of network users for CAN bus devices are:

• Automation devices such as PLCs

• PCs

• Input and output modules

• Drive control systems

• Analysis devices, such as a CAN monitor

• Control and input devices as Human Machine Interfaces (HMI)

• Sensors and actuators

Baumer_GIM500R_CANopen_MA_EN.docx

03.19

5/29