DOUGLAS MACHINES CORP. LD-20-PT Panduan Pengoperasian - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Mesin pencuci piring DOUGLAS MACHINES CORP. LD-20-PT. DOUGLAS MACHINES CORP. LD-20-PT 16 halaman. Pan washer
Halaman Cetak
Note: Your machine is equipped with a programmable circuit board that assists
you in diagnosing common problems by displaying error codes on the
digital display.
Error Codes Will Be Displayed As:
Error Codes
Er01
Er02
Er03
Er04
Er05
Er06
Er07
If any other codes are displayed: Contact Douglas Machines Corp. for assistance.
Douglas Machines Corp.
TROUBLE SHOOTING
- Machine has exceeded allowable fill time
- Indication of low incoming water pressure
- The "stop" button has been pressed while the
machine was in the wash cycle
- Excessive water loss while the machine is in
operation indicating the drain might be open
- Control board error, which may indicate that the
PC board needs to be reprogrammed; contact
Douglas Machines Corp. for assistance
- Operation of the machine has been attempted
without a sufficient amount of water in the wash
tank. Make sure the machine is filling correctly,
and to the overflow level
- Door is not closed properly
- Pump overload protection device has been
tripped. Reset overload; contact Douglas
Machines Corp. if problem persists
Things to check
Page 14 of 16