DOUGLAS MACHINES CORP. SD-36 Panduan Pengoperasian - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Mesin pencuci piring DOUGLAS MACHINES CORP. SD-36. DOUGLAS MACHINES CORP. SD-36 16 halaman. Pan washer
Halaman Cetak
1. Wash pump motor lubrication. You will find two (2) grease fittings on the
top of the wash pump motor and one (1) at each end. You will need to
grease these under normal conditions every 90 days. Use an electric
motor bearing grease similar to Shell Dollum or Chevron Sill.
2. If you have one of the larger pan washers, such as the model SD-36, LD-
36, LD-20-PT or one of the rotary table washers, you may need to grease
the 12" steam extraction fan bearings.
Note: Some of these fans are equipped with sealed bearings and do not require
greasing. You will need to determine if your fan is equipped with the
sealed bearings or if the bearings will need to be greased. Refer to your
parts manual to identify the steam extraction fan and the grease fitting
location. If greasing is required, it should be performed every three (3)
months. Use high temperature food grade grease such as Sentinel Slnth
#2.
3. The removal of lime and or scale may be necessary at certain times. This
will vary due to the condition of your water. If you are finding lime and
scale building on the interior walls of the machine, chances are they are
also building up in the piping. This could impair washing ability. You will
need to use a lime and scale remover. Whatever you decide to use, be
sure it is safe to apply on stainless steel, bronze, and brass. If you have
any questions on what to use or how to use it, do not hesitate to contact
Douglas Machines Corp.
Douglas Machines Corp.
Periodical Maintenance
Page 12 of 16