Asus RT-N13U - Wireless Router Panduan Memulai Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Router Nirkabel Asus RT-N13U - Wireless Router. Asus RT-N13U - Wireless Router 2 halaman.
Juga untuk Asus RT-N13U - Wireless Router: Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman)
Halaman Cetak
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with
any other antenna or transmitter.
Safety Information
To maintain compliance with FCC's RF exposure guidelines, this equipment should
be installed and operated with minimum distance 20cm between the radiator and your
body. Use on the supplied antenna.
Declaration of Conformity for R&TTE directive 1999/5/EC
Essential requirements – Article 3
Protection requirements for health and safety – Article 3.1a
Testing for electric safety according to EN 60950-1 has been conducted. These are
considered relevant and sufficient.
Protection requirements for electromagnetic compatibility – Article 3.1b
Testing for electromagnetic compatibility according to EN 301 489-1 and
EN 301 489-17 has been conducted. These are considered relevant and sufficient.
Effective use of the radio spectrum – Article 3.2
Testing for radio test suites according to EN 300 328- 2 has been conducted. These
are considered relevant and sufficient.
CE Mark Warning
This is a Class B product, in a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
Operation Channels: Ch1~11 for N. America, Ch1~14 Japan, Ch1~13 Europe (ETSI)
IC Warning
The Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulation.
Cet appareil numerique de la class B respecte toutes les exigences du Reglement
sur le materiel brouilleur du Canada.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction
of Chemicals) regulatory framework, we published the chemical substances in our
products at ASUS REACH website at http://green.asus.com/english/REACH.htm.
Extending Your Wireless Network - Repeater Mode
1. Choose the Repeater mode.
Router
AP
Repeater
2. Connect your devices.
Modem
RT-N13U (rear panel)
Client
Wireless Router
3. Launch the web browser and follow the Quick Internet Setup (QIS) steps.
4. Setup is completed.
!
English
1. Choose the Repeater mode.
2. Connect your devices.
3. Launch the web browser and follow the Quick Internet Setup (QIS) steps.
4. Setup is completed.
Bahasa Indonesia
1. Pilih mode Repeater.
2. Sambungkan perangkat.
3. A ktifkan browser Web, kemudian ikuti langkah-langkah Quick Internet Setup (QIS).
4. Konfigurasi selesai.
ไทย
1. เลื อ กโหมด Repeater (รี พ ี ต เตอร์ )
2. เชื ่ อ มต่ อ อุ ป กรณ์ ข องคุ ณ
3. เปิ ด เว็ บ เบราเซอร์ และทำตามขั ้ น ตอน การตั ้ ง ค่ า อิ น เตอร์ เ น็ ต ด่ ว น (QIS)
4. การตั ้ ง ค่ า เสร็ จ สมบู ร ณ์
Türkçe
1. Yineleyici modunu seçin.
2. Aygıtlarınızı bağlayın.
3. W eb tarayıcınızı açın ve Quick Internet Setup (Hızlı İnternet Kurulumu) (QIS) adımlarını
izleyin.
4. Kurulum tamamlanır.
한국어
1. 리피터 모드를 선택해 주십시오.
2. 장치를 연결해 주십시오.
3. 웹브라우저를 실행하고 연결 마법사의 지시에 따라 주십시오.
4. 설정이 완료되었습니다 .
Bahasa Malaysia
1. Pilih mod Pengulang.
2. Sambungkan peranti anda.
3. L ancarkan penyemak imbas web dan ikut langkah-langkah Persediaan Internet Pantas
(QIS).
4. Persediaan selesai.
繁體中文
1. 選擇中繼器模式。
2. 連接裝置。
3. 開啟網頁瀏覽器並按照快速網際網路設定（QIS）的步驟操作。
4. 設定完成。
簡体中文
1. 選擇中繼器模式。
2. 連接設備。
3. 開啟網頁瀏覽器並按照快速互聯網設置（QIS）的步驟操作。
4. 設置完成。
電子信息產品污染控制標示：圖中之數字為產品之環保使用期限。僅指電子
信息產品中含有的有毒有害物質或元素不致發生外洩或突變從而對環境造成
污染或對人身、財產造成嚴重損害的期限。
有害物質或元素
六價鉻
多溴聯苯
多溴二苯醚
部件名稱
鉛 (Pb) 汞 (Hg) 鎘 (Cd)
(Cr(VI))
(PBB)
(PBDE)
印刷電路板及其電子組件
×
○
○
○
○
○
外殼
×
○
○
○
○
○
電源適配器
×
○
○
○
○
○
外部信號連接頭及線材
×
○
○
○
○
○
中央處理器與內存
×
○
○
○
○
○
○： 表 示該有毒有害物質在該部件所有均質材料中的含量均在 SJ/T 11363-2006 標准規定
的限量要求以下。
×： 表 示該有毒有害物質至少在該部件的某一均質材料中的含量超出 SJ/T 11363-2006 標
准規定的限量要求，然該部件仍符合歐盟指令 2002/95/EC 的規范。
備註：此產品所標示之環保使用期限，係指在一般正常使用狀況下。
DGT Warning
Extending Your Wired Network - AP Mode
!
1. Choose the AP mode.
Router
AP
Repeater
2. Connect your devices.
Modem
RT-N13U (rear panel)
Router
Client
3. Launch the Device Discovery utility and configure the security settings.
RT-N13U
Wireless N Router with All-in-One Printer Server
Device Discovery
Client
Utility CD
4. Setup is completed.
!
English
1. Choose the AP mode.
2. Connect your devices.
3. Launch the Device Discovery utility and configure the security settings.
4. Setup is completed.
Bahasa Indonesia
1. Pilih mode AP.
2. Sambungkan perangkat.
3. A ktifkan utilitas Device Discovery (Pemulihan Perangkat), kemudian konfigurasikan
pengaturan keamanan.
4. Konfigurasi selesai.
ไทย
1. เลื อ กโหมด AP
2. เชื ่ อ มต่ อ อุ ป กรณ์ ข องคุ ณ
3. เ ปิ ด ยู ท ิ ล ิ ต ี ้ Device Discovery (การสำรวจอุ ป กรณ์ )
และกำหนดการตั ้ ง ค่ า ด้ า นความปลอดภั ย
4. การตั ้ ง ค่ า เสร็ จ สมบู ร ณ์
Türkçe
1. AP modunu seçin.
2. Aygıtlarınızı bağlayın.
3. D evice Discovery yardımcı programını başlatın ve güvenlik ayarlarını yapılandırın.
4. Kurulum tamamlanır.
한국어
1. AP 모드를 선택해 주십시오.
2. 장치를 연결해 주십시오.
3. Device Discovery 유틸리티를 실행하여 보안 설정을 구성해 주십시오.
4. 설정이 완료되었습니다 .
Bahasa Malaysia
1. Pilih mod AP.
2. Sambungkan peranti anda.
3. L ancarkan utiliti Penemuan Peranti dan konfigurasikan seting keselamatan.
4. Persediaan selesai.
繁體中文
1. 選擇基地台模式。
2. 連接裝置。
3. 啟動 Device Discovery 應用程式並進行安全設定。
4. 設定完成。
簡体中文
1. 選擇AP模式。
2. 連接設備。
3. 啟動 Device Discovery 應用程序並進行安全設置。
4. 設置完成。
EC Declaration of Conformity
We, the undersigned,
Manufacturer:
ASUSTek COMPUTER INC.
Address, City:
No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C.
Country:
TAIWAN
Authorized representative in Europe:
ASUS COMPUTER GmbH
Address, City:
HARKORT STR. 21-23, 40880 RATINGEN
Country:
GERMANY
declare the following apparatus:
Product name :
ASUS Wireless N Router with All-in-One Printer Server
Model name :
RT-N13U
conform with the essential requirements of the following directives:
2004/108/EC-EMC Directive
EN 55022:2006 Class B
EN 55024:1998+A1:2001+A2:2003
EN 61000-3-2:2006
EN 61000-3-3:1995+A1:2001+A2:2005
EN 55013:2001+A1:2003+A2:2006
EN 55020:2007
1999/5/EC-R &TTE Directive
EN 300 328 V1.7.1(2006-10)
EN 301 489-1 V1.8.1(2008-04)
EN 300 440-1 V1.4.1(2008-05)
EN 301 489-3 V1.4.1(2002-08)
EN 300 440-2 V1.2.1(2008-03)
EN 301 489-4 V1.3.1(2002-08)
EN 301 511 V9.0.2(2003-03)
EN 301 489-7 V1.3.1(2005-11)
EN 301 908-1 V3.2.1(2007-05)
EN 301 489-9 V1.4.1(2007-11)
EN 301 908-2 V3.2.1(2007-05)
EN 301 489-17 V1.3.2(2008-04)
EN 301 893 V1.4.1(2005-03)
EN 301 489-24 V1.4.1(2007-09)
EN 50360:2001
EN 302 326-2 V1.2.2(2007-06)
EN 50371:2002
EN 302 326-3 V1.3.1(2007-09)
EN 62311:2008
EN 301 357-2 V1.3.1(2006-05)
EN 50385:
2006/95/EC-LVD Directive
EN 60950-1:2001+A11:2004
EN60065:2002+A1:2006
CE marking
(EC conformity marking)
Position : CEO
Name :
Jerry Shen
Declaration Date: Jun. 5, 2009
Year to begin affixing CE marking:2009
Signature :
__________