Asus AP200 Panduan Referensi Perangkat Keras - Halaman 20
Jelajahi secara online atau unduh pdf Panduan Referensi Perangkat Keras untuk Server Asus AP200. Asus AP200 32 halaman. Asus ap200 dual pentium iii group server hardware reference guide
Halaman Cetak
Chassis Intrusion Photo Sensor
This motherboard has a photo sensor onboard, which detects extreme levels
of light entering the chassis such as when the chassis is opened, and sends a
signal to the ASMA software in such an event. To enable this function,
Jumper18 must be set to Enable and an external battery must be connected
to the motherboard's external battery connector. If you want to work on the
inside of the chassis when an external battery is connected, you should dis-
able Jumper18 to save the battery power.
P2B-D/DS Chassis Intrusion Photo Sensor
Panel Connections
Several wires should be connected to the motherboard for the IDE/SCSI
activity, power, and message indicators on the front panel. Panel connec-
tions also allow for an ATX power button, reset switch, and speaker. Con-
nect the chassis front panel wires as illustrated:
Button Cell Battery
for motherboard
BIOS and clock
White
Black
White
Chassis Panel
Connectors
Green
White
JP18
EXTBATT
IR
20
IV. Hardware Setup
Chassis Intrusion
Photo Sensor
1
R
1
H.D.D. LED
Speaker
Red
Violet
Reset SW
White
Red
Power SW
Black
Yellow
Turbo LED
White
Power LED
AP200 Hardware Reference Guide
Photo Sensor Setting
JP18
EXTBATT
Red (+)
White
Black (+)
White
Violet (+)
White
Red (+)
Black
Yellow (+)
White
Green (+)
White
JP18
Disable
1 2 3
Enable