Baumer EXG50 Panduan Pengguna - Halaman 29
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Digital Baumer EXG50. Baumer EXG50 42 halaman. Gigabit ethernet
Juga untuk Baumer EXG50: Panduan Pengguna (42 halaman)
Halaman Cetak
5.4. IP Configuration
5.4.1. Persistent IP
A persistent IP adress is assigned permanently. Its validity is unlimited.
Please ensure a valid combination of IP address and subnet mask.
IP range:
0.0.0.0 – 127.255.255.255
128.0.0.0 – 191.255.255.255
192.0.0.0 – 223.255.255.255
These combinations are not checked by Baumer-GAPI, Baumer-GAPI
Viewer or camera on the fly. This check is performed when restarting the
camera, in case of an invalid IP - subnet combination the camera will start
in LLA mode.
* This feature is disabled by default�
5.4.2. DHCP (Dynamic Host Configuration Protocol)
The DHCP automates the assignment of network parameters such as IP addresses, sub-
net masks and gateways. This process takes up to 12 sec.
Once the device (client) is connected to a DHCP-enabled network, four steps are processed:
▪ DHCP Discovery
In order to find a DHCP server, the client sends a so called DHCPDISCOVER broad-
cast to the network.
▪ DHCP Offer
After reception of this broadcast, the DHCP server will answer the request by a
unicast, known as DHCPOFFER. This message contains several items of information,
such as:
Information for the client
Information on server
MAC address
offered IP address
IP adress
subnet mask
duration of the lease
Subnet mask:
255�0�0�0
255�255�0�0
255�255�255�0
Internet Protocol:
On Baumer cameras IP v4
is employed.
▲ Figure 38
Connection pathway for
Baumer Gigabit Ether-
net cameras:
The device connects
step by step via the
three described mecha-
nisms.
DHCP:
Please pay attention to the
DHCP Lease Time.
◄ Figure 39
DHCP Discovery
(broadcast)
◄ Figure 40
DHCP offer (unicast)
29