Baumer SXC10c Panduan Pengguna - Halaman 37

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Digital Baumer SXC10c. Baumer SXC10c 48 halaman. Sxc series cameralink cameras with truesense imaging sensors
Juga untuk Baumer SXC10c: Panduan Memulai Cepat (2 halaman)

Halaman Cetak

User Sets

8.6.

Three user sets (1-3) are available for the Baumer cameras of the SXC series. The user

sets can contain the following information:

Parameter

Binning Mode

CameraLink

Control

Defectpixellist

Digital I/O Settings

Exposure Time

Gain Factor

Look-Up-Table

These user sets are stored within the camera and and cannot be saved outside the de-

vice.

By employing a so-called "user set default selector", one of the three possible user sets

can be selected as default, which means, the camera starts up with these adjusted pa-

rameters.

8.7.

Factory Settings

The factory settings are stored in an additional parametrization set which is used by de-

fault. This settings are not editable.

Parameter

Mirroring Control

Offset

Partial Scan

Pixelformat

Readout Mode

Testpattern

Trigger Settings