Baumer FLDM 170G1030/S42 Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penghitung Uang Tunai Baumer FLDM 170G1030/S42. Baumer FLDM 170G1030/S42 44 halaman. Laser copy counter
Flow chart for setting the operational parameters
C Parameters
C0 Pulse
C1 Running
Length [msec]
Direction
value
0 = leading
10.0
1 = trailing
C4 Dead Time
C3 Suppression
Mode
00 dynamic
01 synchronous
02 fixed
C8 Dead Time
03 reflective
Operational
parameters are set !
C5 Encoder
resolution [mm/pulse]
C6 Dead Path [mm]
FLDM 170G....
C7 Encoder A/B
0 = off (A only)
1 = on (A/B)
Default values are underlined. In most cases, the default setting will provide good results.
The factory preset default values can be reset anytime in submenu F4.
The names in the flow chart appear on the display as shown in square brackets in the next section.
User manual Scatec-10 / -15
Version 2017-10
C2 False Pulse
Suppression
0 = off
1 = on
C9 Pulse Delay
[%]
value
0 = off
18
1 = on
[ms]
C10 Pulse Delay
[ms]
value
20
value
100
C9 Pulse Delay
value
0 = off
1 = on
1
C11 Pulse Delay
[mm]
value
value
20
100
FLDM 170C....
C15 Sensitivity Mode
0 = standard
1 = customized
C13 Tail Edge
Suppression
0 = standard
1 = extended
C12 Output at End
of Pulse Train
0 = first
1 = last
13 / 44
www.baumer.com
C16 Sensitivity
Setting
parameters are set !
01 high
02 medium
03 low
04 very low
C17 Threshold
value
179
C18 Hysteresis
value
32
C14 Short Pulse
Suppression
0 = off
1 = on
Baumer Electric AG
Frauenfeld, Switzerland
Operational