Amphenol PL182X-61-4 Manual
Jelajahi secara online atau unduh pdf Manual untuk Kabel dan konektor Amphenol PL182X-61-4. Amphenol PL182X-61-4 4 halaman. 2 pos connector assembly spec
Halaman Cetak
PowerLok4.0 2芯 组装式插头安装规范
PowerLok4.0 2 Pos Connector Assembly SPEC
安装步骤 ‐ 2.5mm²/4mm²线缆
Assembly Instructions ‐ 2.5mm²/4mm² Cable
1.选择符合以下要求的屏蔽线缆。
Choose proper shielding cable;
线缆规格 Cable Size
2.5mm² or 14AWG
4mm² or 12AWG
2. 按尺寸剥开电线外套、屏蔽层及绝缘皮，并剪掉多余屏蔽线。
Strip jacket, braiding wire, insulation, fold back braiding wire as shown below.
3. 在屏蔽层上套上铜套，铜套需套到底，套上铜套后屏蔽线不能露出。
Load copper ferrule onto braiding wire to bottom. Visual check to make sure there is no loose
shielding strands uncovered.
®
直径 OD (mm)
5.2±0.2
5.8±0.2
1 of 4
PL‐02AI‐002 Rev 2
剥皮尺寸 Peeling Size"A"(mm)
8.5±1
9.5±1
™
Rev 2