Baumer HUBNER BERLIN HOG 10 Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Peralatan Industri Baumer HUBNER BERLIN HOG 10. Baumer HUBNER BERLIN HOG 10 40 halaman. Incremental encoder with connecting cable ölfle
Juga untuk Baumer HUBNER BERLIN HOG 10: Panduan Petunjuk Pemasangan dan Pengoperasian (36 halaman), Panduan Petunjuk Pemasangan dan Pengoperasian (40 halaman), Petunjuk Pemasangan dan Pengoperasian (40 halaman), Petunjuk Pemasangan dan Pengoperasian (40 halaman), Petunjuk Pemasangan dan Pengoperasian (40 halaman), Petunjuk Pemasangan dan Pengoperasian (32 halaman), Petunjuk Pemasangan dan Pengoperasian (36 halaman), Petunjuk Pemasangan dan Pengoperasian (36 halaman), Petunjuk Pemasangan dan Pengoperasian (28 halaman)

Security indications

3.1

Risk of injury due to rotating shafts

Hair and clothes may become tangled in rotating shafts.

• Before all work switch off all operating voltages and ensure machinery is stationary.

3.2

Risk of destruction due to electrostatic charge

Electronic parts contained in the encoder are sensitive to high voltages.

• Do not touch plug contacts or electronic components.

• Protect output terminals against external voltages.

• Do not exceed max. operating voltage.

3.3

Risk of destruction due to mechanical overload

Rigid mounting may give rise to constraining forces.

• Never restrict the freedom of movement of the encoder.

The installation instructions must be followed.

• It is essential that the specified clearances and/or angles are observed.

3.4

Risk of destruction due to mechanical shock

Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the optical sensing

system.

• Never use force. Assembly is simple when correct procedure is followed.

• Use suitable puller for disassembly.

3.5

Risk of destruction due to contamination

Dirt penetrating inside the encoder can cause short circuits and damage the optical sensing

system.

• Absolute cleanliness must be maintained when carrying out any work on the open terminal box.

• When dismantling, never allow lubricants to penetrate the encoder.

3.6

Risk of destruction due to adhesive fluids

Adhesive fluids can damage the optical sensing system and the bearings. Dismounting an en-

coder, secured to a shaft by adhesive may lead to the destruction of the unit.

3.7

Explosion risk

Do not use the encoder in areas with explosive and/or highly inflammable materials. They may

explode and/or catch fire by possible spark formation.

MB097.3 - 11070460

Baumer_HMG11-HOG10_II_DE-EN (16A2)

Security indications

