Amphenol Temposonics GP Instruksi Singkat - Halaman 4

Jelajahi secara online atau unduh pdf Instruksi Singkat untuk Aksesori Amphenol Temposonics GP. Amphenol Temposonics GP 12 halaman. Linear position sensor analog and digital pulse outputs
Juga untuk Amphenol Temposonics GP: Panduan Pengguna (8 halaman)

Halaman Cetak
Temposonics
G-Series
®
Brief Instructions

2. Safety instructions

2.1 Intended use

This product may be used only for the applications defined
under item 1 only in conjunction with the third-party devices
and components recommended or approved by
Temposonics. As a prerequisite of proper and safe operation
the product requires correct transport, storage, mounting and
commissioning and must be operat ed with utmost care.
1. The sensor systems of all Temposonics
intended exclu sively for measurement tasks encountered
in industrial, commercial and laboratory applications.
The sensors are considered as system accessories and
must be connected to suitable evaluation electron ics,
e.g. a PLC, IPC, indicator or other electronic control unit.

2.2 Forseeable misuse

Forseeable misuse
Lead compensating currents
through the enclosure
Wrong sensor connection
Operate the sensor out of the
operating temperature range
Power supply is out of the
defined range
Position measurement is
influenced by an external
magnetic field
Cables are damaged
Spacers are missing / are
installed in the wrong order
Wrong connection
of ground / shield
Use of a magnet that is not
certified by Temposonics
series are
®
Consequence
The sensor will be damaged
The sensor does not work
properly or can be destroyed
No signal output
The sensor can be damaged
Signal output is wrong /
no signal output /
the sensor can be damaged
Signal output is wrong
Short circuit – The sensor
can be destroyed / sensor
does not respond
Error in position
measurement
Signal output is disturbed
The electronics can be
damaged
Error in position
measurement
I
4
Do not reprocess the sensor afterwards.
 The sensor might be damaged.
Do not step on the sensor.
 The sensor might be damaged.
Manuals, Software & 3D models available
at: www.temposonics.com
I