Amphenol RESMLAC-8MG-CAPS-POE Panduan Pengguna Perangkat Keras - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna Perangkat Keras untuk Beralih Amphenol RESMLAC-8MG-CAPS-POE. Amphenol RESMLAC-8MG-CAPS-POE 17 halaman. Ip67 rugged ethernet managed switch
Halaman Cetak
Ethernet ports
connection
Serial wiring
RESMLAC 8MG CAPS POE - UM
The following table indicates the appropriate wiring connections for the Gigabit Ethernet
ports relative to the available link speeds. Please note that MDI is the preferred
connection choice. The Ethernet switches are capable of connecting using the MDIX
scheme, but it is not advised.
Switch
RJ-45
Contacts
Pinout
P/N
Base-T
Pair 0 (+/-)
1/2
BI_DA+-
Pair 1 (+/-)
3/6
BI_DB+-
Pair 2 (+/-)
4/5
BI_DC+-
Pair 3 (+/-)
7/8
BI_DD+-
One port is dedicated for the management of the product .With a dedicated cable you can
access the CLI mode via port MNG through serial link. To manage the switch via the
WEB interface you can use all eight ports.
The following table indicates the appropriate wiring connections for the MNG dedicated
serial port.
Signal
TX (PIN-7)
RX (PIN-8)
GND (PIN-6)
www.amphenol-socapex.com
MDI
1000
100
10 Base-
Base-T
TX+-
TX+-
RX+-
RX+-
Unused
Unused
Unused
Unused
Direction
Output
Input
Reference
rev. 1
MDI-X
1000
100
T
Base-T
Base-T
BI_DA+-
RX+-
BI_DB+-
TX+-
BI_DC+-
Unused
BI_DD+-
Unused
Type
DB9 Pinout
RS-232
RS-232
Ground
Tel: +33(0)4.50.89.28.00
10 Base-
T
RX+-
TX+-
Unused
Unused
PIN 2
PIN 3
PIN 5
Page 8/16